8
Equipment Supplied
The equipment supplied includes the components
listed below:
– Scale with ataached display and control unit
– Load plate
– Column/display holder
– Dust cover for display and control unit
– Operating instructions
Installation Instructions
The Sartorius Economy scales are designed to provide
reliable weighing results under normal ambient
conditions. When choosing a location to set up your
scale, observe the following so that you will be able
to work with added speed and accuracy:
– Set up the scale on a stable, even surface
– Avoid placing the scale in close proximity to
a heater or otherwise exposing the scale to heat
or direct sunlight
– Protect the scale from drafts that come from open
windows or doors
– Avoid exposing the scale to extreme vibrations
during weighing
– Protect the scale from aggressive chemical vapors
– Do not expose the scale to extreme moisture
over long periods
Conditioning the Scale
Moisture in the air can condense on the surfaces of a
cold scale whenever it is brought into a substantially
warmer place. If you transfer the scale to a warmer
area, make sure to condition it for about 2 hours at
room temperature, leaving it unplugged from AC power.
Installing the Display and Control Unit on the
Column/Display Holder
$ See the enclosed operating instructions for the
Economy scales
To Next Page
Loading...
Need help?
General