Operating Manual EVO1X | LAB1X 7
Safety
Warnings Concerning Installation and Operation:
The equipment must only be used indoors. Avoid generating static electricity on glass
and plastic parts. Connect the scale and the ex-link converter to the equipotential
bonding conductor using a suitable low-resistance method. All electrical circuits are
grounded and electrically connected to the metal parts of the devices.
− The installation must be checked for correct function and safety by trained and
qualified personnel at appropriate intervals (e.g., checking the cables for
damage).
− Operating personnel must be trained to recognize faulty operating states and to
be able to initiate the necessary safety measures (e.g., disconnecting the ex-link
converter from the power supply).
Lay the cables where they pose no risk of causing someone to trip.
Danger of Scale Damage!
Never close a paint can using a hammer while it is still on the weighing pan.
When closing, place the paint can on a firm, stable surface.
Observe the additional safety precautions and hazard warnings in subsequent
chapters.
2.3 Intended Use
This scale is only intended for mixing colors and paints. The scale is connected
to the ex-link converter only using the link cable supplied. The scale and ex-link
converter may only be used in potentially explosive areas in accordance with Safety
Instructions 2023040 in Chapter 15, page 42. Appropriate containers must be used
for loading each type of material.
The scale can be operated via the keypad as a stand-alone device or using
application software (e.g., a paint-mixing program from a paint manufacturer)
installed on a connected PC. The PC is connected to the ex-link converter via a
USB cable.
To Next Page
Loading...
Need help?
General