18
General Technical Specifications
(for use Standard Applications Not Subject to Legal Metrology)
Model IS 64 FEG-S
Readability g 1
Reproducibility (standard deviation) g
≤
± 0.5
Linearity
≤
± 2.0
Response time (average) s
≤
± 1
Fastest response time (IQ) s
≤
± 0.8
Adaption to ambient conditions and
application requirements
By selection of 1 of 4 optimized filter levels
Data output speed (depends on the
filter level selected)
s
ms
0.1 – 0.2 – 0.4 (normal data output speed)
20 – 40 – 80 (fast data output speed)
Dust and water protection rating acc.
to DIN 40050/IEC 529
IP 67
Net weight, approx. kg 15
Requirements for power connection
(optional)
V Via AC adapter, ING2: 230 V or 115 V (to be
connected by your dealer or Sartorius service technician
only)
Frequency Hz 48 – 63
Power consumption,
with
isi
10, 20 30 connected to ING2;
platform connected only to ING2
VA, approx.
VA
34: maximum;
18: average
11: average
Selectable weights units g, kg*, ct, oz, ozt, tlh, tls, tlt, GN, dwt, mg, /lb, tlc, mom,
K, tol, bat, MS, tons
* = the weight unit “kg” can only be selected for use in
legal metrology (e.g., legal-for-trade applications)
Automatic zero tracking, can be
turned off by menu code
Standard future
Built-in interface PS-485 via round connector (XBPI transmission protocol):
8-bit; odd parity; transmission rates: 96,00-34,000;
half-duplex - convertible to RS-232 (SBI protocol):
7-bit; parity: even, mark, odd, space;
transmission rates:
150 ... 19,200 baud; 1 or 2 stop bits;
Software/Hardware Handshake;
factory setting: 1,200 baud; odd parity; 1 stop bit;
Hardware handshake with 2 characters after CTS
Ambient operating temperature range
o
C 0 … +40
To Next Page
Loading...
