32
Council Directive 73/23/EEC
"Electrical Equipment Designed for Use within Certain Voltage Limits"
Applicable European Standards:
EN 60950
Safety on information technology equipment including electrical Business
equipment
EN61010
Safety requirements for electrical equipment for measurement, control and
laboratory use
Part 1 : General Requirements
lf you use electrical equipment in installations and under ambient conditions
requiring higher safety Standards, you must comply with the provisions as
specified in the applicable regulations for installation in your country.
Weighing Instruments Used in Legal Metrology:
Council Directive 2009/23/EC "Non-Automatic Weighing Instruments"
For the respective Declaration of Type Conformity for weighing instruments
that have been verified by Sartorius for use as legal measuring instruments
and that have an EC Type-Approval Certificate, see page 33 or next page.
The legal basis allowing Sartorius to perform EC verification is constituted by
the EC Council Directive No. 2009/23/EC on non-automatic weighing
instruments that has been in effect since January 1 , 1993, in the Infernal
Market as well as by the Certificate of Accreditation of the Sartorius
Quality Management System issued by the Metrology Department of the
Regional Administration Office of Lower Saxony, Germany
("Niedersächsisches Landesverwaltungsamt - Eichwesen",now MEN,
Mess- und Eichwesen Niedersachsen) on February
15,1993.
For information on the
mark on Sartorius equipment and legal regulations
currently applicable in your country, and to obtain the names of the persons to
contact, please ask your local Sartorius office, dealer or service center.
To Next Page
Loading...
