0–3
Page
Interface Description 5– 1
General Specifications 5– 1
Data Output Formats 5– 2
Data Input Formats 5– 6
Table of ASCII Characters 5– 9
Synchronization and
Data Output Parameters 5–10
Settings for the
Interface Parameters 5–13
Control Lines 5–14
Pin Assignment Chart 5–15
Cabling Diagram 5–16
Product Data Sheets 6– 1
Specifications 6– 2
EC Pattern Approval Certificates 6–20
Dimensions (Scale Drawings) 6–24
Accessories (Options) 6–28
Page
Declarations of Conformity 7– 1
The CE Mark of Conformity
on Sartorius Equipment 7– 1
“EC Verification” – A Service
Offered by Sartorius for Balances
Acceptable for Verification 7– 4
“New Installation” – A Service
Offered by Sartorius 7– 4
Subsequent Verifications within
the European Union 7– 4
Sartorius European Service
Center Addresses 7– 5
Declaration of Conformity
to Directive No. 90/384/EEC 7– 6
Certification for the Sartorius
Quality System for the Weighing
Technology Division (in German) 7– 7
Declaration of Conformity
to Directive 89/336/EEC 7– 8
Supplement:
Brief Instructions
To Next Page
Loading...
Need help?
General