148
Specifications
Standard Models
Model ME415S ME235S ME215S ME235P ME215P
Readability mg 0.01 0.01 0.01 0.01/0.02/0.05 0.01/0.02/0.05
Weighing capacity g 60/200/410 60/230 60/210 60/110/230 60/110/210
Tare range (subtractive) g –410 –230 –210 –230 –210
Repeatability <±mg 0.015/0.025/ 0.015/0.025 0.015/0.25 0.015/0.04/ 0.015/0.04/
0.035 0.04 0.04
Linearity <±mg 0.15 0.1 0.1 0.15 0.15
Sensitivity drift within
+10 to +30 °C (50 to 86 °F) <±/K 1·10
–6
Response time (average) s < 8 < 8 < 8 < 8 < 8
External calibration weight g 2x 200 (E2) 200 (E2) 200 (E2) 200 (E2) 200 (E2)
(of at least accuracy class...)
Allowable ambient operating temperature +5 to +40 °C (41 to 104 °F)
Operating temperature range +10 to +30 °C (50 to 86 °F)
Adaptation to ambient conditions By selection of 1 of 4 optimized filter levels
Display update rate (depends on filter level) 0.2 – 0.4
Pan size mm d 90
Balance dimensions (W x D x H) mm 252 x 533 x 292
Weighing chamber height mm 239
Net weight, approx. kg 11.1
Dust and water protection rating of the
balance housing according to EN 60529 IP32
Power connection Using wide-range AC adapter for voltage ratings of 100 V to 240 V
Nominal frequency 50 – 60 Hz
Power consumption max. 35 VA
Hours of operation with fully charged
YRB05Z external battery pack, approx. 10 h
DC nominal supply voltage 10.5 to 25 Vdc
Selectable weight units Grams, kilograms, carats, pounds, ounces, Troy ounces, Hong Kong taels,
Singapore taels, Taiwanese taels, grains, pennyweights, milligrams, parts per pound,
Chinese taels, momme, Austrian carats, tola, baht, mesghal
Selectable application programs Toggle weight units, counting, weighing in percent, animal weighing,
recalculation, calculation, density determination, differential weighing,
air buoyancy correction, air density determination, checkweighing,
time-controlled functions, totalizing, formulation, statistics,
2nd tare memory, identification codes, product data memory
To Next Page
Loading...
