Need help?Do you have a question about the Sartorius ME235P and is the answer not in the manual?
General| Capacity | 230 g |
|---|---|
| Readability | 0.001 g |
| Pan Size | Ø 90 mm |
| Display | LCD |
| Linearity | ± 0.002 g |
| Repeatability | 0.001 g |
| Stabilization Time | ≤ 3 seconds |
| Interface | RS232, USB |
Guidelines for safe installation and operation, including warnings.
Using scanners or keyboards for data entry on the balance.
Connecting external switches for balance functions.
Controlling the balance via a computer.
Describes how balance settings are stored in memory.
Steps for safely unpacking the balance.
Procedure for internal linearization after transporting the balance.
Steps for acclimatizing the balance to ambient temperature.
Instructions for setting up specific balance models.
Instructions for setting up remote operation of the display unit.
Important safety warnings related to power connection and adapters.
Procedure for selecting the display language.
Step-by-step guide for setting the language to U.S. mode.
Configuration for the primary weight unit display.
Procedure for setting or modifying the balance password.
Settings for balance interface ports (serial, printer).
Configuration options for the balance display.
Settings for assigning functions to balance keys.
Information on default factory settings for application parameters.
Details on factory settings for application parameters.
Basic settings for the first application group.
Functionality for determining the number of pieces.
Functionality for displaying weight in proportion to a reference.
Functionality for weighing small animals with averaging.
Functionality for calculating values using algebraic equations.
Functionality for calculating values using algebraic equations.
Functionality for determining the diameter of wires and filaments.
Functionality for determining density and volume of samples.
Functionality for comparing sample weights before and after treatment.
Functionality to correct weighing errors due to air buoyancy.
Functionality for checking weights against limits.
Functionality for time-based balance operations.
Functionality for summing up weight values.
Functionality for statistical evaluation of weight data.
Functionality for formulating mixtures based on weights.
Assigning IDs for documentation and printouts.
Storing weight values in a second tare memory.
Storing and loading data records for applications.
Displaying minimum sample quantity per USP guidelines.
Displaying dynamic measurement uncertainty per DKD standards.
Configuring printouts specific to applications.
Settings for automatically printing displayed values.
Configuring data output to ports.
Configuration for ISO/GLP compliant printouts.
Resetting printout settings to factory defaults.
How to display device information on specific balance models.
How to display device information on ME5 and SE2 models.
The fundamental weighing operation of the balance.
Instructions for performing balance calibration.
Instructions for performing balance calibration and adjustment.
Instructions for opening and closing the balance draft shield.
Details on draft shield operation for specific models.
Details on draft shield operation for ME5 and SE2 models.
Settings for operating and configuring the static electricity eliminator.
Port settings for PC, remote display, or checkweighing connection.
Port settings for connecting printers.
Setting a password to restrict access to balance parameters.
Procedure for checking the balance's repeatability.
Procedure to restore all factory settings in the setup menu.
No user-definable parameters.
Settings for including identification codes in printouts.
Configuring line format for printouts with or without data ID codes.
Instructions for cleaning the balance and draft shield doors.
Specific cleaning instructions for the weighing chamber of certain models.
Specific cleaning instructions for the weighing chamber of ME5/SE2 models.
To Next Page
