Need help?Do you have a question about the Sartorius ME414S and is the answer not in the manual?
General| Maximum Capacity | 410 g |
|---|---|
| Readability | 0.1 mg |
| Pan Size | Ø 80 mm |
| Display | LCD |
| Power Supply | AC adapter or rechargeable battery |
| Capacity | 410 g |
| Repeatability | 0.1 mg |
| Linearity | ±0.2 mg |
| Calibration | Internal |
| Interface | RS232 |
| Operating Temperature | 10 °C to 30 °C |
Lists general safety guidelines to ensure safe and trouble-free operation of the balance.
Explains how error codes are indicated and provides basic troubleshooting information.
Explains the need for internal linearization after the balance has been transported.
Explains how to connect the balance to the AC power supply using the provided adapter.
Highlights safety considerations related to AC adapters, electrical connections, and FCC compliance.
Details the procedure for ensuring the balance is perfectly level for accurate results.
Provides instructions on how to set, change, or delete the password for menu access.
Explains configuration for checkweighing and time-controlled functions.
Explains how to display and print measurement uncertainty values according to DKD standards.
Details the various printout parameters, including application-defined output and interface settings.
Provides specific steps for viewing device information on different balance models (ME/SE series).
Details the primary weighing function, its features, and associated soft key operations.
Provides guidance on handling samples, environmental factors, and static electricity.
Explains the purpose, features, and configuration of the N.I.C.E. static electricity eliminator.
Specifies calibration requirements for balances used as legal measuring instruments in the EU.
Details the steps for performing external calibration using factory-defined weights and placing the calibration weight.
Details how to switch off the isoCAL function for EU-verified balances and the resulting limitations.
Details procedures for deleting or omitting lots and individual samples, including confirmation steps.
Details the procedure for determining air density using reference weights or direct entry.
Explains two methods for obtaining air density: numeric entry and weighing reference weights.
Details features and preparation steps for displaying and printing DKD uncertainty measurements.
Lists control commands for operating draft shield doors on different balance models (ME/SE series).
Addresses specific error codes and messages related to differential weighing operations and data handling.
Details how to clean the weighing chamber and draft shield doors for different balance models.
Details steps for selecting password settings, defining new passwords, and deleting current passwords.
To Next Page
