7
Notes on Installation
Changing the Port Number
If you use the USB interface with a program that limits
the number of COM port designations (e.g., only COM1
through COM4), you may have to assign one of these port
numbers to the new virtual interface.
– Set up is as follows in Windows:
Select “Start”
“Settings” “Control Panel”
– Select “System”
– Select “Hardware” Insert arrow “Device Manager”
– Expand “Ports
– Double-click on “USB Serial Port
– Select “Port Settings” Insert arrow “Advanced”
Changing the Latency Timer
In the dialog opened above for changing the port number,
you can set the latency timer to 1 msec for faster data
communication.
To Next Page
Loading...