5
Warning and Safety Instructions
Installation
Only connect or disconnect the climate
module when the device is unplugged
from the power supply.
t Connect the D-SUB plug securely to the
device.
Safety
The climate module should only be
used indoors, and make sure that
foreign bodies and liquids cannot
penetrate it.
ESD protection measures must be
taken
Do not touch conductive parts for
reasons of ESD protection.
Therefore, when inserting the climate
module, only touch the housing or the
side edges! Do not touch the contact
surfaces.
Therefore: Take preventative measures.
As a minimum safeguard, you should
touch a grounded piece of metal to
discharge any static electricity.
To Next Page
Loading...