EasyManuals Logo

SAS RM-MT330-2 User Manual

SAS RM-MT330-2
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
GB
9
turn off the engine, wait for the cutting device to stop and disconnect the spark
plug cap;
fit the cutting device guard;
use protective gloves when handling the blades;
Keep the blade protection device on;
only hold the machine using the hand grips and position the cutting device in the
opposite direction to that used during operation.
b) when using a vehicle to transport the machine, position it so that it can cause no
danger to persons and fasten it firmly in place to avoid it from tipping over, which may
cause damage or fuel spillage.
INTENDED USE
This unit is designed to be used in accordance with the descriptions and safety instructions
indicated in this operating manual
- for private use
- for trimming lawn edges and small in accessible areas of grass(e.g.underbushes)
- for cutting wild growth,shrubs and undergrowth.
It is not permitted to use this unit for any other purposes.
The user is liable for all injuries to third parties and damage to their property.
Operate the unit only in the technical condition as stipulated and delivered by the manufacturer.
Arbitrary changes to the unit will exclude the manufacturer from any liability for resulting injury
and/or damage.
TECHNICALSPECIFICATIONS
Model
RM-MT330-2
Equipment mobility
Hand-held
Unit mass(empty tanks without cutting
attachment)
6,8kg
Volumes of fuel tank
900cm³
Engine model
1E36F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SAS RM-MT330-2 and is the answer not in the manual?

SAS RM-MT330-2 Specifications

General IconGeneral
BrandSAS
ModelRM-MT330-2
CategoryTrimmer
LanguageEnglish