EasyManuals Logo

SAS RM-MT330-2 User Manual

SAS RM-MT330-2
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
GB
22
On the other hand, the user should not keep the engine speed in max speed after cutting. Any
prolonged use at the highest speed is likely to reduce lifetime of engine.
Cut the grass from right to left.
Always take care to maintain a well balanced and secure position.
Wear the harness as illustrated in the figure. The blade turns anti-clockwise, so it is advised to
use the unit from right to left to make an effective cut. Ensure the people present are at least 15
meters away.
CAUTION!
In an emergency, stop the engine by moving the Ignition switch (22) to the stop position.
If the cutter accessory strikes stone or other debris, stop the engine and check whether
something has been damaged and the cutter attachment is still secure.
If wet grass or branches are remain in the cutter attachment, stop the engine and remove them.
Cutting
att
a
chments
:
Attention! Use only original cutting devices or ones homologated by the Manufacturer
WARNING! In consideration that the selection, application and usage of the accessory to
be fitted in the variety of possible usage are actions made solely by the user, the latter
assumes responsibility for damages of any kind due to such actions.When in doubt or if

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SAS RM-MT330-2 and is the answer not in the manual?

SAS RM-MT330-2 Specifications

General IconGeneral
BrandSAS
ModelRM-MT330-2
CategoryTrimmer
LanguageEnglish