GB
29
Cleaning
1. Keep your machine clean, the outside of the machine can be cleaned using a damp soft
cloth with a mild detergent if required, never use water to clean the machine as it may cause
damage to internal parts.
2. Some maintenance products and solvents may damage the plastic parts, these include
products containing benzene. Trichloroethylene, chloride and ammonia.
3. Take special care to keep the ventilation inlets /outlets free from obstruction. Cleaning with a
soft brush followed by a compressed air jet will usually be sufficient to ensure acceptable
internal cleanliness.
4. Wear eye protection when carrying out cleaning.
Repairs
Only an authorized service center should repair the machine.
To Next Page
Loading...
General