Installation
You can place the thermostat on the wall in the desired room.
Perform the wall mounting by removing the back cover and marking where you will drill holes for it. Then, screw the cover
into the designated, marked place and "attach" the room unit. Place the thermostat in a location where it is not directly
exposed to a heat source or to sunlight (example in the picture).
Make sure that the thermostat is placed on a neutral
position, not near a heating or cooling source, on an
inside wall and on a proper height. Doing so, we
allow the thermostat to work properly.
After you’ve completed this step, preform electrical
wiring. Once again, the assembly / installation should
be carried out by a qualified person!
To Next Page
Loading...
Need help?
General
