Technical specification
Product introduction
Adding thermostat
Main Features
SASWG-01(Gateway)
Phone
Internet
1
2
SEA801-APP is a stylish and accurate TRV programmable controller
has been designed for independent control heang radiators and also
able to remote monitoring by a phone. It is fied to a new or exisng
thermostac radiator valves (Short name---TRV), and according to a
series of programmed sengs to control temperature in a room.
1) PID control
2) 7 days independent programming
3) Child lock funcon
4) Open window funcon
5) Lime scale protecon
6) Frost protecon
7)
Holiday mode oponal
8)
9) Baery lifeme 1 year
10) Temporary hold funcon
11) Low baery indicator
12) Easy to install
Monitoring by phone
Thermostat type Programmable electronic radiator valve controller
Power supply 2x1.5V AA alkaline
Battery life Up to 1 year
Ambient temperature
0℃~50℃
Storagetemperature range
-10 ℃
Accuracy
±0.5℃
Dimensions
L:85mm,
¢
:50mm
Color White
Spring force
80N≤F≤130N
Connection M30x1.5mm
Radio frequency 868MHz
Radio range 100M(Unobstructed)
IP class IP21
~60
If you want to control your thermostat remotely, what
you only need is to activate the mobile app, and learn to
use it:
1. Operation of adding thermostat
Step1: operaon on thermostat, press buon “AUTO/MANU” and buon
“+” simultaneously ll the screen shows up “ ” which means current
status is available to adding thermostat, exit this status if failure to adding
thermostat in 30s, also press buon “AUTO/MANU” and buon “+” ll the
screen shows up “ ” which means eliminang the current coding and
adding thermostat again.
Step2: operaon on phone, long press the H O USE in the Overview interface
that will shows up a pull-down menu, then press “add thermostat” and toggle
to interface of adding thermostat.
2. Aer add thermostat the interface of thermostat will show the coding
number of thermostat, the interface of phone will back to the Overview,
if failure to add thermostat, thermostat will back to the main screen and
indicate failure on phone.