Saswell SEA801-APP User Manual

5
6
Temperature and time factory setting chart as follows:
If the user want to change the default temperature, press the button, the
display will show temperature blink, and then press the “+” or “-” button to
set the temperature you wanted.
When the thermostat is in program mode, Both hold the“+” & “-” button at
least 3 seconds, and the screen will show “DEF” blink three times and all
the program setting will back to factory default.
Start time
Time period
Operating mode
Monday~Sunday
06:00-08:00 08:00-18:00 18:00-22:00 22:00-06:00
Temperature
21℃ 21℃16℃ 16℃
Operation
E 1
E 2
9. Error code
● When the NTC sensor is short circuit, the display shows “ ”
● When the NTC sensor is open circuit, the display shows “ ”
Low baery indicator
When the baery is low, the screen will show “ ”, which is reminds you to
change the baery as soon as possible. As the baery is lower than ulmate
work voltage, the valve will automacally open completely; meanwhile, the
controller will also close the screen display.
2. Program seng
2.1 Holiday mode: constant temperature without mer program
●Press the “AU TO/MANU” buon to switch to manual operang mode
●Press the “+” or “-” buon to set the temperature. This temperature is
maintained unl you return to automac operang mode. (the temperature
set range is 5℃-30℃) .
2.2 Timer program seng
You can set 2 comfort and 2 economy periods for each day of the week are
numbered from 1 to 7 (Monday to Sunday) in the mer program.
●Press the “PROG” buon, you can make the same seng for all the days of
a week, select 1-7 via the “+” or “-” buon. You can also make independent
seng for each day of the week, select the day you want with the “+” or “-”
buon. Press again the “PRO G” buon to confirm your seng.
3. Date/Time seng
8. Frost protecon
If the temperature drops below 6℃, the radiator controller will open the
valve unl the temperature rises above 8℃ again. In this way, it can ensure
the radiator will not freeze.
7. Lime scale protecon
If the valve is not open completely once within two weeks, the valve will be
automacally open and closed in short me. This can ensure that the valve
not seize. The display then shows the message “AdAp”.
6. Open Window funcon
If you open a window the temperature will drops dramacally, the radiator
controller closes the valve for saving energy. The screen will show message
“OPEN” , the radiator controller will reopen the valve when the temperature
rise again, or aer 46 minutes at least. You can also open the valve by pressing
any buon.
5. Child lock seng
If you want to lock the S EA800 to prevent it being tampered with:
Press the “AU TO/MANU” and “PROG” buon together about 3 seconds.
● The display screen will show message”B LOC”. Use the same combinaon
of buons to free the SEA800 for operaon again.
4. Temporary override
In program operaon, if you want to change the current program seng
temperature, press “+” or “-” buon to set the temperature. Meanwhile,
the logo” ”or” ”on the display screen will disappear. The controller
will override the current program seng temperature and keep the room
temperature at the selected temperature unl the next period begins.
Once the baeries got inserted or replaced, system will automacally
requests you to set date and me. Use the “+” or “-”buon to set the
years, press the “PROG” buon to confirm, and the same way to set the
month, day, hour, minute.

Saswell SEA801-APP Specifications

General

Brand	Saswell
Model	SEA801-APP
Category	Controller
Language	English