2. Select heating cycle rate
The FA setting is used to produce shorter heating cycles. The SL
setting produces a longer heating cycle. Both settings produce very
accurate temperature control and can be set to your personal
preference. FA cycles the system at a 0.5ºF (0.5ºC) differential, and SL
cycles the system at 1.5ºF (1.5ºC).
3. Select system heating type
Users can select the system heating type according to their
heating system. Select 0 for gas, oil, or electric heating systems.
Select 1 for a heat pump heating system.
4. Select display backlight
The display backlight improves display contrast in low lighting
To Next Page
Loading...
Need help?
General
