CANCEL THIS FEATURE. When Filter Alarm is displayed, you can
clear it by pressing the ▲ and ▼ buttons. This resets the timer and
starts counting the days until the next filter change.
6. Select ºF or ºC readout
Changes the display readout to Centigrade or Fahrenheit as
required.
7. Select temperature recalibration
This feature allows you to adjust the displayed room temperature
up to 4º higher or lower. Your thermostat can be accurately calibrated
to match your previous thermostat. The current or adjusted room
temperature will be displayed on the display.
8. Select compressor lockout delay 0,1,2,3,4,5
To Next Page
Loading...
