The configuration menu allows you to set certain thermostat operating
characteristics to your system or personal requirements. Move the SYSTEM
switch to the OFF position, then press and hold the PRGM and RUN buttons for
3 seconds to enter the configuration menu. The display will show the first item in
the configuration menu. Press the PRGM button to move to the next menu item,
or press TIME to return to a previous menu item. To revert to factory default
settings, press the RESET button (See Fig. 3). All user’s changed settings will
revert to factory default settings, including program settings. Use the ▲or▼
buttons to select. To exit the configuration menu and return to normal operation,
press the RUN button. If no buttons are pressed within 130 seconds, the
thermostat will exit the configuration menu.
The configuration menu chart summaries the configuration options. An
explanation of each option follows.
To Next Page
Loading...
Need help?
General
