expire. Then the thermostat will cut power to the heating/cooling system.
Important: Replace the batteries when the low battery message flashes on
the display. This will keep the thermostat operating properly. With two “AA”
batteries installed, your thermostat will maintain time and continuously display
the temperature during a loss of AC power.
1. Place the COOL/OFF/HEAT switch in the OFF position.
2. Put the FAN AUTO/ON switch in the AUTO position.
3. Gently pull the cover straight off the base.
4. Install two “AA” alkaline batteries in the battery
compartment. Be sure to match the positive (+) ends of the
batteries with the positive terminals marked in the battery
To Next Page
Loading...
Need help?
General
