EasyManuals Logo

Saswell T21STK-2 User Manual

Saswell T21STK-2
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Do not short (jumper) across terminals on the gas valve or at the system
control to test installation. This will damage the thermostat and void the
warranty.
Do not switch the system to cool if the temperature is below 50ºF (10ºC). This
can damage the air conditioning system and may cause personal injury.
Replace batteries when the battery icon indicates the low battery message.
Change the Air Filter when the Filter Change Icon begins blinking.
Use this thermostat only as described in this manual.
REMOVE THE OLD THERMOSTAT--------------------------------------------------------------------------
WARNING!: Electrical Shock Hazard
1. Turn off power at the main service panel by removing the fuse or switching the
appropriate circuit breaker to the OFF position before removing the existing
thermostat.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Saswell T21STK-2 and is the answer not in the manual?

Saswell T21STK-2 Specifications

General IconGeneral
BrandSaswell
ModelT21STK-2
CategoryThermostat
LanguageEnglish

Related product manuals