Satco NUVO 65/700 - User Manual

1
LED STRIP LIGHTS
Models: 65/700, 65/701, 65/702, 65/703, 65/706, 65/707, 65/708
Satco Products, Inc.
Bre n t wo o d, N Y 11717
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xture. Retain for future reference.
© Copyright 2021 Satco Products, Inc. 6/21
INSTALLATION – Surface Mount
CCT INSTRUCTIONS
STEP 1: Install appropriate anchors into the ceiling or wall.
STEP 3: Secure xture backplate on to the wall or ceiling
using appropriate hardware.
STEP 2: Turn OFF the power and connect wires by using
wire nuts. See wiring diagram below.
STEP 4: Press the cover upward and lock it with xture
springs. Installation of xture is compete.
Item # Description Finish/Details Volts Temperature CCT Watts
65/700 2' LINEAR STRIP WHITE FINISH 100-277V
WHITE
100~277V
-20°C to 60°C
3500K
4000K
5000K
20W
65/701 4' LINEAR STRIP WHITE FINISH 100-277V
30W
40W
50W
65/702 8' LINEAR STRIP WHITE FINISH 100-277V
65/703 8' LINEAR STRIP WHITE FINISH 120-347V 120~347V 82W
65/706 2' & 4' SUSPENSION KIT 59" SUSPENSION LENGTH – – – –
65/707 8' SUSPENSION KIT 59" SUSPENSION LENGTH – – – –
65/708 ADD ON EM 8W/1440LM/90 Min. Run Time – – – –
WARNING: Risk of Fire or Electric Shock
• To reduce the risk of re, electrical shock or injury to persons; read
and follow all warnings and installation instructions before installing.
• All installation should be performed by a qualied electrician.
• To avoid electric shock, ensure power is turned off before installation.
• All wiring must be installed in accordance with all Electrical Codes.
• To prevent product malfunction and/or electrical shock, this product
must be properly grounded.
• Suitable for damp locations.
• Suitable for non-insulated surface and frame. DO NOT cover xture
with insulation liner or similar material.
• DO NOT install xture on unstable or easily breakable surface.
• DO NOT exert force on the surface of the xture.
65/700 2' (0.610m) W
65/701 4' (1.2m) W
65/702 8' (2.4m) W
65/703 8' (2.4m) W
STEP 1: Press the Spring buttons and remove xture cover. STEP 2: Position desired CCT to 3500K, 4000K or 5000K
as needed. After selecting CCT, secure cover.
4' LF = 36 1/4"
8' LF = 83 3/8"
BLACK
WHITE
GREEN
LINE
NEUTRAL
GROUND
Wiring Diagram
Fixture
PURPLE
GREY
DIM +
DIM –

Summary

Installation and Safety Instructions

General Safety Warnings

Crucial safety precautions regarding fire, electrical shock, and proper installation procedures.

CCT Adjustment Instructions

Steps for selecting and adjusting the Color Correlated Temperature (CCT) of the fixture.

Surface Mount Installation Guide

Step-by-step instructions for securely mounting the LED strip lights onto a surface.

Optional EM Driver and Motion Sensor Installation

Accessory Installation Steps

Comprehensive steps for installing optional Emergency Driver and Motion Sensor accessories.

Wiring Diagram for Optional EM Driver and Sensor

EM Driver and Sensor Wiring Details

Detailed schematic illustrating the wiring connections for the EM Driver and Motion Sensor.

Satco NUVO 65/700 Specifications

General

Brand	Satco NUVO
Product Type	LED Downlight
Lumens	700
Color Temperature	3000K
CRI	90
Dimmable	Yes
Housing Color	White
Trim Color	White
Housing Material	Aluminum
IC Rated	Yes
Wet Location Rated	Yes
Voltage	120V
Life Hours	50, 000 hours