The Satisfyer Pro 2 enables multiple and incredibly intense orgasms within
minutes. With its oval head, innovative vacuum technology and touch-free
massage, it provides an extra dose of pleasure.
Functions/operation
Press the small button at the bottom for 2 seconds to turn the toy on. This
activates the lowest massage setting on the Satisfyer Pro 2.
Spread the labia apart a little to free the clitoris. With gentle pressure, place
the oval head on your clitoris, making sure the head is situated comfortably
in the hollow. Once you’ve found the ideal position, you won’t need to
move the toy again.
Tip: if you use a water-based lubricant such as Waterglide
(www.waterglide.com) it will feel even better. You can achieve even more
intense pulsation by using the Satisfyer Pro 2 underwater (e.g. in the shower
or bath)
The Satisfyer Pro 2 is switched on using the little, round button and it starts
on the lowest level. You can adjust the vibration intensity using “+” and “-“.
Every time you press “+“, the intensity will increase by one level. The intensity
is reduced again by pressing “-“. There are 11 levels of intensity you can
choosefrom.ToturntheSatisfyerPro2off,brieypresstheroundbutton.
Cleaning
The Satisfyer Pro 2 is waterproof and very easy to clean – you can even use
a cotton bud to clean the nozzle.
For optimal cleaning we recommend using a special sex toy cleaner such
as Toysterile (www.toysterile.com) - this is available from specialist shops.
Leave it to work its magic for a while, then simply wipe it off with a soft,
lint-free and clean cloth.
Regularly cleaning will prolong the life of your Satisfyer Pro 2.
Storage
Keep your Satisfyer Pro 2 away from direct sunlight and extreme
heat. Store it separately from your other toys in a dust-free
environment.
03
Material Max. charging current: 500 mA
Silicone, ABS Battery: Li-Ion
Battery capacity: 220 mAh
Specications Charging voltage: 5V
Charging time: approx. 1,5h Usage period: approx. 90 min
Storage temperature: -5°C – 60°C Interface: USB
Charging
The toy is rechargeable and enables easy, cable-free handling.
It must be fully charged before rst use. To do so, use the supplied USB
charging cable: simply dock the cable on the metal contact points of the toy
provided for this purpose. If the charging cable does not attach by itself,
connect it to the power circuit and wait for a moment – this will reactivate
the magnetic effect and the contact will connect automatically. The LED will
blink while the product is being charged. Once the product is charged, it will
stay lit. The initial charge may take up to eight hours.
Troubleshooting
Ifthereisafaultoryouhavedifcultyoperatinganyofthetoy’sfunctions
please press the bottom operating button for 5 seconds. If the device still
does not work, please get in touch with us at service@satisfyer.com.
Disposal
Old electronic devices should be disposed of in accordance with the
hazardous waste directive, national regulations in countries that are part of
the European Union and other European countries or other general national
regulations.Pleasefollowyourcountry-specicregulationsforthedisposal
of such items and if you are unsure, ask your dealer for information on how
to dispose of the item.
Notes on the Battery Act (in European Union countries and other
European countries that operate separate recycling systems for old
batteries):
As a dealer that sells batteries and rechargeable batteries, we are obliga
-
ted to act in accordance with the Battery Act and are therefore required
to direct consumers’ attention to the following: you are legally required to
recycle batteries and rechargeable batteries. You can send them back to us
free of charge once you no longer need them, deposit them in a communal
collection point or return them to a local shop.
04
To Next Page
Loading...