What to do if my SATO KEIRYOKI SK-8700 Thermometer does not turn on?
If your SATO KEIRYOKI Thermometer isn't powering on, the first step is to replace the battery (6F22 "006P"). If it still fails to turn on after a battery replacement, it's possible that internal components have been damaged due to impact or dropping. In this case, the unit requires professional repair.
Why is my SATO KEIRYOKI SK-8700 Thermometer temperature reading abnormal?
Abnormal temperature readings on your SATO KEIRYOKI Thermometer can stem from several factors: * Insufficient battery power: Replace the battery (6F22 "006P"). * Incorrect measurement spot size: Ensure the object's size aligns with the measurement spot size relative to the distance. * Attached lens cap: Remove the lens cap. * Fluctuating object temperature: Measure an object with a stable temperature. * Dirty infrared lens: Clean the infrared lens. * Fluctuating ambient temperature: Allow the thermometer to adjust to the ambient temperature. * Emissivity mismatch: If the object's emissivity differs significantly from 0.95, adjust accordingly, using paint or tape if the emissivity is unknown. * External heat source: Shield the thermometer from nearby high-temperature object...
General| Type | Infrared Thermometer |
|---|---|
| Sensor Type | Thermopile |
| Resolution | 0.1°C |
| Display | LCD |
| Power Source | 9V battery |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 60°C |
To Next Page
