Unit 3: Installation
Lt408 Operator Manual
3-2 PN: 9001152A
UNPACKING & PARTS IDENTIFICATION
Unpack the printer as directed in the folowing procedure.
1. Place the shipping container (box) upright on a stable, flat surface.
2. Open the box, remove any loose items and the first layer of packing material.
3. Carefully lift the printer and accessories from the box and place them on a stable, flat surface.
4. Remove the plastic covers from the packed items and visually inspect for physical damage.
5. Ensure all components are present as dictated on the Packing List.
6. Report damaged property to the shipping carrier.
Figure 3-1, Unpacking
Accessory Box
Shipping Box
Printer
Cushion
To Next Page
Loading...
