SATO M-8485Se - Page 134

Page 6-21
Section 6. Replacement Procedures
PN 9001080
Rev. A
SATO M-8485Se Standard Print Engine
Service Manual
Replacing the Timing Belts
IDLER PULLEY “A” BRACKET
REMOVE SCREW FROM
MECHANICAL SIDE OF PRINTER
REMOVE MOTOR
REFER TO SECTION 6-8
RIBBON REWIND
SPINDLE
THREE LEVEL IDLER
GEAR “B” (UNDER
BRACKET)
IDLER PULLEY “C”-
LOOSEN (2) SCREWS
TO REMOVE BELT “B”
6-30
Figs.