SATO M-8485Se - Section 6. Interface Specifications; INTRODUCTION; INTERFACE TYPES

Page 9-4
Section 9. Options
Rev. A
SATO M-8485Se Standard Print Engine
Service Manual
Memory PC Board Installation
REMOVE (2) SCREWS
AND WASHERS FROM THIS
END OF STANDOFFS
(STEP 2)
REMOVE (2) SCREWS,
NUTS AND STANDOFFS.
THIS HARDWARE WILL BE
MOUNTED ON THE MAIN PC
BOARD
(STEP 1)
HOLES FOR
MOUNTING
CONNECTOR TO
MEMORY BOARD
MAIN PC BOARD SHOWING WHERE THE
MEMORY BOARD WILL BE INSTALLED
CONNECTOR TO MAIN
PCB BOARD
9-1
Fig.
9-2
Fig.