SATO SK-270WP - Page 15

14
10. Specifications
Cat. No.
No. 8078-00
No. 8078-20
Model
Waterproof Digital Thermometer SK-270WP
Hole for wall-mount
〇
×
Display range
-50.0 to 300.0°C
(Measuring range is different depending on the probes connected)
Display Accuracy
When operation ambient is 0 to 40°C
± (0.1 + 1 digit) at -40.0 to 200.0°C
± 5 digit at other than above
When operation ambient is -10 to 0.1°C, 40.1 to 60°C
± (0.2 + 1 digit) at -40.0 to 200.0°C
± 10 digit at other than above
Resolution
0.1°C
Sampling time
About 0.5 to 1 sec.
(When the temperature changes a lot, the sampling time is 0.5 sec.
and when it is calm, it automatically changes to 1 sec.)
Grade of protection from water
Conforming to JIS C0920 Protection IP 67 rated
(when the probe is connected to the unit)
Operation ambient
-10 to 60°C, less than 80%rh (no condensing)
Storage ambient
-10 to 60°C (no condensing)
Operational Functions
HOLD, MIN. MAX, HACCP (Temp./Time), Buzzer,
Low battery mark, Auto-Power-Off
Power requirements
3VDC (“AAA” size alkali battery x 2 pcs.)
Battery life
About 1000 hours continuous (without buzzer function)
About 500 hours continuous (with buzzer function)
(Using alkali batteries in normal measurement)
Materials
PC resin
Dimensions
70(W)  171(H)  40(D) mm
Weight
Approx. 155g (including batteries)
Standard Accessories
S270WP-01 standard probe, AAA size alkaline battery x 2 pcs
vinyl cover, neck strap, instruction manual
• All specifications and appearance subject to change with or without notice for improvement
purpose.
• No. 8078-01 and No. 8078-22 are without probe type. S270WP-01 is not attached.