Windshield Wipers
Use this lever, located on the right side of the
steering wheel, to operate the windshield wipers.
9(Off): Move the lever to this position to
turn off the windshield wipers.
&(Intermittent; Speed Sensitive Wipers): Move
the lever to this position for intermittent or speed
sensitive operation. The amount of delay time
varies between wiping cycles due to the delay
setting selected or the speed of the vehicle.
x(Delay): While the lever is in the intermittent
position, turn the intermittent adjust band with
this symbol on it up or down to select a shorter or
longer delay between wiping cycles. To the left
of the adjust band are bars, increasing in size from
bottom to top, that indicate the frequency of the
wipes. Smaller bars mean the wipers movement is
less frequent. Larger bars mean the movement
is more frequent.
6 (Low Speed): Move the lever up to the
first setting past intermittent, for steady wiping at
low speed.
1 (High Speed): Move the lever up to the
second setting past intermittent, for wiping
at a high speed.
8(Mist): Move the lever all the way down to
this position for a single wiping cycle. Hold it there
until the windshield wipers start; then let go.
The windshield wipers stop after one wiping cycle.
If additional wiping cycles are needed, hold the
lever down longer.
165
To Next Page
Loading...
Need help?
General
