Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unlock the air compressor inflator hose from the
sealant canister by pulling the lever up.
2. Disconnect the air compressor inflator hose from
the sealant canister.
3. Unwrap the sealant filling hose from the
compressor.
4. Turn the sealant canister so the inflator filling hose
is aligned with the slot in the compressor.
5. Lift the sealant canister from the compressor and
replace with a new sealant canister. See your
dealer/retailer for more information.
5-76
To Next Page
Loading...
