“RESTING”
Crust color selection contain：
“LIGHT” ; “MEDIUM” ;
“DARK” ; “RAPID”
LED indicator show if start working.
Control Panel Sketch Map
The buttons instruction
Bread Maker have three different
status ： TEST status, SETUP status,
OPERATING status.
TEST status is only used in production
test not for user. Press the
"START/STOP" button and enter
TEST status. Press the “START/STOP”
once again and exit TEST status
and then enter SETUP status. If not
press “START/STOP” but plug on,
and then directly enter SETUP program.
Under SETUP program, pressing
“START/STOP” button will enter
OPERATING program. Under OPERATING
program, press “START/STOP”
button until exceed 2s, and back to
SETUP program and current menu.
“Menu” button---- Menu selection
“Menu” in SETUP program is used
to select the various menu. Click “Menu”
button, buzzer sound a prompt. If
press “Menu” button and hold it,
buzzer sound a warning tone, after 0.5s,
enter constant pressure function, quick
repetition of 5 times per second effec-
tive press button is used to switch menu.
"Color" button----Crust Selection
"Color" button in SETUP program
is used to select crust color. Crust selec-
tion button have no constant pressure
function but only cycle switch.
"Loaf" button ---- Weight Selection
“Loaf” button in SETUP program is used
to select weight.
To Next Page
Loading...