Click “Loaf” button, buzzer sound a
prompt, “Loaf” button have no
constant pressure function but only
cycle switch.
"Start / Stop" button - start / stop
programming.
Press “Start/Stop” to start the
program, before keep warm cycle press
“Start/Stop” and hold it more than
2s and back to SETUP status; after keep
warm cycle press “Start/Stop” and
directly back to SETUP status.
“Time +”button ----Time Delay
increasing
Press this button will increase delay
time by intervals of 10minutes. A
prompt will be heard; this button is
used to increase quick cycle time delay.
"Time-" button ---- Time Delay
descending
Press this button to have descending
delay time by intervals of 10minutes. A
prompt will be heard; this button is
used to descend quick cycle time delay.
To Next Page
Loading...