- 14 -
Note:
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and
could become damaged.
If the suction power of the vacuum cleaner gets low please check the hose for obstacles. You can open the hose
by pressing the square part on the hose handle. Take apart the two parts and remove any obstacles. To assemble
the hose again first press the flexible hose into the handle and then click in the connection part.
Important:
All filters should be checked regularly for signs of damage, preferably after each cleaning task. The filters must
be replaced immediately if they become damaged. Always disconnect the vacuum from the electrical outlet
when checking the filters.
Parking:
This vacuum cleaner can be parked as below style to save your room space.
To Next Page
Loading...
