Sauder 402375 - Computer Desk Part Identification

Table of Contents Assembly Tools Required
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Français
Español
Safety
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
2-3
4-5
6-22
23-25
26-28
29-30
31
Hammer
Not actual size
Skip the power trip.
This time.
A2 RIGHT END (1)
B LEFT END (1)
C2 RIGHT UPRIGHT (1)
D2 LEFT UPRIGHT (1)
E3 TOP (1)
F2 MODESTY PANEL (1)
G2 RIGHT BOTTOM (1)
H LEFT BOTTOM (1)
I RIGHT BACK (1)
J LEFT BACK (1)
K ADJUSTABLE SHELF (1)
L KEYBOARD SHELF (1)
M DOOR (1)
N LARGE DRAWER FRONT (1)
R SMALL DRAWER FRONT (1)
V2 RIGHT BASE (1)
W LEFT BASE (1)
D44 SMALL DRAWER RIGHT SIDE (1)
D45 SMALL DRAWER LEFT SIDE (1)
D78 LARGE DRAWER BACK (1)
D86 SMALL DRAWER BACK (1)
D260 LARGE DRAWER RIGHT SIDE (1)
D263 LARGE DRAWER LEFT SIDE (1)
D707 LARGE DRAWER BOTTOM (1)
D716 SMALL DRAWER BOTTOM (1)
Now you know
our ABCs.
Part Identifi cation
å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
Tape Measure
402375 www.sauder.com/servicesPage 2