Sauder 408726 - Step 4: Attach Small Upright and Back to Top; Hidden Cam Tightening Procedure

Fasten the SMALL UPRIGHT (E2) and SMALL BACK (K2) to the TOP (F2). Tighten two HIDDEN CAMS.
4
4
S
t
e
p
E2
K2
F2
Page 8 www.sauder.com/services 408726
Caution
Risk of damage or
injury. Hidden Cams
must be completely
tightened. Hidden
Cams that are not
completely tightened
may loosen, and parts
may separate.
To completely tighten:
Start Tighten
Maximum
210 degrees
Arrow
Minimum
190 degrees
Arrow
Finished edge
Finished edge
Surface with
HIDDEN CAM