Sauder 408761 - Page 2

Table of Contents Assembly Tools Required
2-3
4
5-20
21-24
25-28
29-30
31
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
408761 www.sauder.com/servicesPage 2
Part Identifi cation
å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
A RIGHT END (1)
B LEFT END (1)
C UPRIGHT (1)
D RIGHT UPRIGHT (2)
D14 LARGE RIGHT DRAWER SIDE (1)
D15 LARGE LEFT DRAWER SIDE (1)
D78 LARGE DRAWER BACK (1)
D107 RIGHT DRAWER SIDE (1)
D108 LEFT DRAWER SIDE (1)
D109 DRAWER BACK (1)
D707 LARGE DRAWER BOTTOM (1)
D716 DRAWER BOTTOM (1)
E LEFT UPRIGHT (1)
F TOP (1)
G HUTCH TOP (1)
H MODESTY PANEL (1)
I SHELF (1)
J HUTCH BACK (1)
K BACK (1)
L BRACE (2)
M SIDE BASE (2)
N BASE (1)
O LARGE DRAWER FRONT (1)
T DRAWER FRONT (1)
Electric drill with 1/4" bit
(ONLY in indicated step)