Sauder 408995 - Step 8: Secure Base and Brackets

å
Fasten four ANGLE BRACKETS (5G) to the LEFT END (B) and
UPRIGHT (C). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure the edges of the ANGLE BRACKETS are even with
the edges of the LEFT END and UPRIGHT.
å
Fasten the BASE (J) to the LEFT END (B) and UPRIGHT (C). Use
four BLACK 9/16" LARGE HEAD SCREWS (1S).
Step 8
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
1S
B
C
J
5G
5G
408995www.sauder.com/services
Page 13
(4 used)