Sauder 410367 - Page 13

å
Fasten fi ve ANGLE BRACKETS (T) to the LOWER ENDS (C and D) and
BOTTOM (F). Use fi ve BLACK 9/16" LARGE HEAD SCREWS (Z).
å
NOTE: Be sure the ANGLE BRACKETS are even with the edges of the
LOWER ENDS and BOTTOM.
å
Fasten the BASE (M46) to the LOWER ENDS (C and D) and
BOTTOM (F). Use fi ve BLACK 9/16" LARGE HEAD SCREWS (Z).
Step 9
410367www.sauder.com/services
Page 13
C
D
F
T
T
T
BLACK 9/16" LARGE HEAD SCREW
(10 used in this step)
Z
Rounded edge
Finished surface
M46