Sauder 411312 - Page 8

Step
å
Open the FURNITURE TIPPING RESTRAINT KIT (97)
and fasten the SAFETY STRAP to the TOP (C2). Use
the provided BLACK 9/16" LARGE HEAD SCREW.
å
Fasten the LEFT END (B2) to the TOP (C2) and
SHELF (F). Tighten four TWIST-LOCK® FASTENERS.
Step 3
411312 www.sauder.com/servicesPage 8
B2
C2
C2
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Finished edge
Edge with
TWIST-LOCK®
FASTENERS
Dowel end
Long fi nished edge
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
F
Surface with
TWIST-LOCK®
FASTENERS
Surface with four
TWIST-LOCK®
FASTENERS
BLACK 9/16" LARGE HEAD SCREW
(1 used in this step)
Safety strap
97