Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
To begin assembly, push six SAUDER TWIST-LOCK®
FASTENERS (7F) into the large holes in the TOP (C2).
å
Open the FURNITURE TIPPING RESTRAINT KIT (97)
and fasten the SAFETY STRAP to the TOP (C2 ). Use the
provided BLACK 9/16" LARGE HEAD SCREW.
411985www.sauder.com/services
Page 5
7F
C2
Do not tighten the TWIST-LOCK® FASTENERS in this step.
7F
7F
BLACK 9/16" LARGE HEAD SCREW
(1 used in this step)
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=2418
to watch a video on how to assemble your unit.
Safety strap
97
To Next Page
Loading...
