Sauder 413072 - Page 23

18
18
S
t
e
p
Page 23
www.sauder.com/services413072
Fasten the LONG DRAWER SLIDES (X and W) to the DRAWER SIDES (D46 and D47). Use four GOLD 5/16" FLAT HEAD
SCREWS (YY) through holes #1 and #3.
NOTE: The DRAWER SLIDES are marked "DRAWER RIGHT" and "DRAWER LEFT" for easy identification.
Fasten a PULL (JJ) to the DRAWER FRONT (O). Use two SILVER 7/8" MACHINE SCREWS (TT).
GOLD 5/16" FLAT HEAD SCREW
(4 used for the DRAWER SLIDES)
YY
Roller end
Roller end
1
2
3
D46
D47
O
W
X
1
2
3
JJ
SILVER 7/8" MACHINE SCREW
(2 used for the PULL)
TT