Sauder 413852 - Page 21

Step 17
å
Fasten the BACK PANEL (I2) to the HEADBOARD (E).
Tighten three HIDDEN CAMS.
å
Fasten the LOWER UPRIGHT (C2) to the BACK PANEL (I2).
Tighten two HIDDEN CAMS.
Arrow
Minimum
190 degrees
Maximum
210 degrees
Roller end
Finished edge
Unfi nished surface
C2
E
I2
Surface without HIDDEN CAMS
Headboard on the LEFT
413852www.sauder.com/service
Page 21