Sauder 414129 - Page 6

Step 2
å
Fasten two of the SMALL SUPPORTS (X) to the
FOOTBOARD RAILS (N2 and O2). Use twelve
BROWN 1" FLAT HEAD SCREWS (12S).
å
NOTE: Start each SCREW a few turns before
tightening any of them.
414129 www.sauder.com/servicePage 6
N2
O2
X
X
The HIDDEN CAM
must be here.
These holes
must be here.
These holes
must be here.
Finished edge
BROWN 1" FLAT HEAD SCREW
(12 used in this step)
12S
Surface with
HIDDEN CAM
Surface with
HIDDEN CAM
Some assembly
(and snacks) required.