Sauder 414356 - Step 10: Attaching Skirt and Brackets

Step 10
å
Fasten three ANGLE BRACKETS (T) to the SHELF (G).
Use three BLACK 9/16" LARGE HEAD SCREWS (Z).
å
Fasten the SKIRT (O) to the SHELF (G). Use three BLACK
9/16" LARGE HEAD SCREWS (Z).
å
NOTE: There are no pre-drilled holes in the SKIRT. The
SCREWS will tighten into the groove.
å
Carefully turn your unit over onto its front edges.
414356 www.sauder.com/servicesPage 14
G
O
T
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
Z
T
U
R
N
O
V
E
R
O
N
L
O
N
G
E
D
G
E
T
U
R
N
O
V
E
R
O
N
L
O
N
G
E
D
G
E
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution