Sauder 414356 - Product Overview and Preparation; Assembly Tools Required; Part Identification

Table of Contents Assembly Tools Required
2-3
4
5-18
19-21
22-24
25-26
27
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
414356 www.sauder.com/servicesPage 2
Part Identifi cation
å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
A RIGHT END (1)
B LEFT END (1)
C LOWER RIGHT END (1)
D LOWER LEFT END (1)
E TOP (1)
F BOTTOM (1)
G SHELF (1)
H LARGE BACK (1)
I BACK (1)
J ADJUSTABLE SHELF (3)
K END MOLDING (2)
M50 BASE (1)
M28 TOP MOLDING (1)
N SHELF MOLDING (3)
O SKIRT (1)
P LOWER END MOLDING (2)