Sauder 422427 - Page 22

Step
å
With a hammer, gently tap twelve SHELF SNAPS (8R) into the
holes in the ADJUSTABLE DOOR SHELVES (O).
å
Insert twelve METAL PINS (1R) into the hole locations of your
choice in the DOOR END (C) and DOOR UPRIGHT (H). Set the
DOOR SHELVES onto the METAL PINS and push down until
each SHELF "snaps" into the SHELF SNAP (8R).
å
Push the RUBBER SLEEVES (2R) over sixteen METAL PINS (1R).
Insert the METAL PINS into the hole locations of your choice in
the ENDS (A2 and B2) and UPRIGHT (D2). Set the ADJUSTABLE
SHELVES (N and P) onto the
METAL PINS.
Step 16
B2
C
D2
N
O
O
O
O
P
P
H
2R
1R
8R
8R
1R
N
422427 www.sauder.com/servicesPage 22
LARGE DOOR ON LEFT
A2
(12 used)
(16 used)
(12 used)