Sauder 423032 - Step 9: Installing Shelf Moldings

Step Step 9
å
Slide a SHELF MOLDING* (N) onto the notched edge of
each ADJUSTABLE SHELF (J).
å
Repeat this step for the other ADJUSTABLE SHELF (J).
å
* U.S. Patent No. 5,499,886
J
N
Slide the SHELF MOLDING (N)
onto the notched edge.
Notched edge
These surfaces
should be even.
The large groove is
closer to this edge.
423032www.sauder.com/services
Page 13