Sauder 430083 - Page 10

å
Open the FURNITURE TIPPING RESTRAINT KIT (96)
and fasten the SAFETY STRAPS to the TOP (D). Use the
provided SHORT SCREWS.
å
Insert two WOOD DOWELS (1) into the UPRIGHT (C).
å
Fasten the TOP (D) to the UPRIGHT (C). Use two 2" FLAT
HEAD SCREWS (12).
å
NOTE: You should start each SCREW a few turns before
completely tightening any of them.
å
NOTE: Be sure the WOOD DOWELS in the UPRIGHT
insert into the TOP.
Step 5
C
D
D
E
O
96
Use the SHORT SCREWS
from the RESTRAINT KIT.
These holes must be here.
1
2" FLAT HEAD SCREW
(2 used in this step)
12
Page 10 www.sauder.com/service 430083
(2 used)