Sauder Craft Armoire - Assembly Instructions; Initial Component Preparation

Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (HH) into the large holes in the FIXED
SHELF (D) and BOTTOM (E).
å
Repeat this step for the OUTER UPRIGHTS (L) and
SHELF UPRIGHT (N).
158097 www.sauder.com/servicesPage 6
(14 used)
HH
Do not tighten the TWIST-LOCK® FASTENERS in this step.
HH
D
E