Sauder Executive Desk 408289 - Step 11: Slide End Moldings

Step 11
å
Slide the END MOLDINGS* (Z) onto the notched edges of
the ENDS (A2 and B2) and UPRIGHTS (C2 and D2).
å
* U.S. Patent No. 5,499,886
408289 www.sauder.com/servicesPage 16
C2
B2
D2
A2
Z
Z
Z
Z
Slide the END MOLDINGS (Z)
onto the notched edges.
The groove should be
closer to this edge.
The groove should be
closer to this edge.